Software "Media coupler / repeater"
Notes on software
4.2.2 Notes on software
Restricted ETS programming access in repeater operation
When the device is used as a repeater (physical address = x.y.1...255 / no media coupler
function), take note that after the physical address is programmed, a repeater can no longer be
reached directly via the TP side. As a result, further programming operations using the ETS
(e.g. programming the application program) can no longer be executed on the TP side without
the media coupler.
Direct access to the device via the TP side is only possible again when the device is reset to
delivery state (see page 27).
Order No. 5110 00
Page 14 of 57