RF/TP media coupler/repeater
RF/TP media coupler/repeater
Order no.: 5110 00
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
The radio communication takes place via a non-exclusively available transmission path, and is
therefore not suitable for safety-related applications, such as emergency stop and emergency
call.
These instructions are an integral part of the product, and must remain with the end customer.
2
Device components
(1)
KNX connection (TP)
(2)
Programming button
(3)
Status LED
Red flashing quickly: Filter function deactivated
Red flashing slowly: Safe-state mode active
Yellow flashing: Telegram traffic
(4)
Antenna (RF)
3
Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed tech-
nical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The range of a radio system depends on various external circumstances. The range can be op-
timised by the choice of installation location. The product documentation for this device contains
application basics for the KNX radio system.
Planning, installation and commissioning are carried out using ETS version 5 or higher. You can
find the up-to-date product database, technical descriptions and Declaration of Conformity on
our Internet site.
32591112
10867569
Figure 1: Device components
25.02.2020
1 / 5