Factory Maintenance; Replacement Parts - Eaton Cutler-Hammer BIHI Instructions Manual

I.L. 16913A
Good maintenance practices call for periodiic
inspection of all electrical apparatus. Terminal lugs
and bus connections should be periodically checked
for lightness of the connections to avoid excessive
heating and premature failure. The Moulded Case
Switches employed in the equipment have self
wiping contacts built in to the design of the switch.
Periodical operation of switches under load
conditions will remove any high resistance film that
might deelop on power contact surfaces.

FACTORY MAINTENANCE

Cutler-Hammer offers extended maintenance
agreements for our ATSBI product. In most
instances such maintenance agreements also
extends warranty periods. Contact your local
Cutler-Hammer Representative for more information
on factory supplied maintenance.

REPLACEMENT PARTS

Many of the logic components of the ATSBI
equipment are individually replaceable with field
installable kits. Cutler-Hammer maintains an in-
house inventory of replacement parts for all
components used in this equipment. Parts are
typically available on a sameday shipment basis.
Contact your local Cutler-Hammer Representative for
replacement parts identification and availability.
Fig. 5 Bussing arrange of Bypass Isolation ATS
Fig. 4 ATS Portion of Bypass Isolation ATS
13
Effective July 2007