Mass Storage Mode - Medion P 4245 Manual

mass storage
mode
Note
The ActivSync® Mode will be loaded automatically after
a few seconds if no mode has been selected.
5. Select the required mode:

Mass Storage Mode

You will be able to use your navigation software as a removable
disk (as a USB stick, for example) in the Mass Storage Mode. Two
drives will be connected to do this: the internal memory of the
navigation system itself and the (optional) memory card, pro-
vided that it has been inserted into the device.
Note
No additional entries can be made on the device at the
same time, if you are in this Mode. Use the 'Remove
hardware safely' function of your operating system to
protect yourself against the loss of data. Then detach
the cable from your navigation system.
The Hardware Installation Assistant will now recognize a new
device and will install a suitable driver. This can take several
minutes.
Appendix
ActiveSync
mode
87