Ii. Connecting With The Pc - Medion P 4245 Manual

You must have administrator rights to install the software
under Windows
Important
You should not connect the navigation system to your
computer yet.
1. Insert the CD/DVD and wait until the program starts
automatically.
Note
If it does not function, the Auto Run function is proba-
bly deactivated. The Setup program on the CD/DVD
must be started, to start installation manually.
2. Choose the language, tap then Install ActiveSync® and
follow the instructions on the screen.
Note
When installing the GoPal Assistant, ActiveSync® will be
installed automatically.

II. Connecting with the PC

1. Press the On/Off button to start your navigation system.
2. Connect the USB cable to your navigation system.
3. Push the USB connector into a free USB port on your com-
puter.
4. The following screen will appear after the navigation system
has been connected:
86
®
2000 or XP.
Appendix