Iii. Working With Microsoft® Activesync - Medion P 4245 Manual

III. Working with Microsoft® ActiveSync®
®
ActiveSync will be started automatically if you connect your
navigation system to the PC. The program will check whether
the device is one with which a partnership has been entered. If
this is the case, the changes that have taken place on the PC
and on the navigation system since the last synchronisation
will be compared and adjusted to each other. You will be able
to define exactly which data will have priority during the syn-
chronisation in the settings of the ActiveSync
up the Help of the Program (with the F1 Button), in order to
become familiar with the effects of the respective settings. A
restricted Guest Access, with which you will be able to ex-
change data, for example, will become active automatically if
the navigation system has not been recognised as a partner. If
this is the case, although the process concerns the registered
partner device, separate your navigation system from the PC
and switch it off and on again. Now connect your navigation
system to the PC, to restart the recognition process. Repeat
the process and, restart your PC in addition, if your device
continues to be recognised as a guest.
Note
Make sure that you always connect your navigation
system to your PC with the same USB connection,
otherwise your PC will allocate an additional ID and
reinstall the device.
Appendix
®
Program. Call
89