Mass Storage Mode; Activesync -Mode; Alternative Possibility Of Charging The Battery - Medion GoPal E3132 Operating Instructions Manual

Mass Storage mode

You will be able to use your navigation device as a detachable device (e.g. a USB stick) in
the Mass Storage mode. Two drives, the internal memory of the navigation system itself
and the (optional) memory card, if it has been inserted into the device, will be connected
to do this.
Note
No further entries can be made on the device at the same time if you are in
this mode. Use the 'Remove hardware safely' function of your operating
system to protect yourself against data loss. Now, remove the cable from
your navigation system.
The Hardware Installation Assistant will now recognize a new device and will install a suit-
able driver. This can take several minutes.
®
ActiveSync -Mode
Repeat the attempt to connect, if it has failed the first time, if you have selected the Active-
Sync® mode.
Follow the instructions on your screen. The program will now set up a partnership be-
tween your PC and navigation system.
Note
The navigation system must have been recognized when setting up the
ActiveSync® mode, in order to be able to work with the GoPal Assistant.

Alternative possibility of charging the battery

The battery will charge as soon as you connect your navigation device to a switched-on PC
or notebook by means of a USB cable (optional). No type of software or driver installation
will be necessary for this. Do not interrupt the charging process if possible during the
initial charge.
- 57 -