Download Print this page
HPE Aruba AP-303P Product End-Of-Life Disassembly Instructions

HPE Aruba AP-303P Product End-Of-Life Disassembly Instructions

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
:
Networking
Product Category
Marketing Name / Model
[List multiple models if applicable.]
AP-303P,Aruba,XGP
AP-303P
OAW-AP303P,Alcatel
AP-303P
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
Notes
With a surface greater than 10 sq cm
2 in product
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
2
0
0
0
0
0
0
0
0
0
0
0
0
0

Advertisement

loading

Summary of Contents for HPE Aruba AP-303P

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description #1 Torx screwdriver Description #2 Static electric tweezers Description #3 Phillips screwdriver Description #4...
  • Page 3 1.Use T9 screwdriver to remove the 5 screws on the chassis and open the top cover with 60 angle. 2.Use static electric tweezers to remove the antenna cable from the main board. 3.Remove the top cover,use PH2 screwdriver to remove 1 screw on the PSE board 4.Remove the PSE board,use PH2 Phillips screwdriver to remove 1 screws on main board 5.Remove the main board from the chassis.

This manual is also suitable for:

Alcatel oaw-ap303p