Volkswagen Marine SDI Series Operating Manual page 37

INSPECTION
Renewing oil filter element
Unscrew the cover 1.
Separate the filter element from the cap.
Clean the cover with a clean cleaning
cloth.
Renew the sealing ring on the cover.
Moisten the new sealing ring with oil.
Fit the new filter element in the cover.
Tighten the cover with a tightening
torque of 25 Nm.
36
36
Pouring in engine oil
For filling quantities, see the chapter
"Technical data".
Check the oil level with the oil dipstick - also
see page 33.
The oil level must be between the
two markings and may never be
above the max. mark.
Important
Used oil must be stored in a safe
place out of reach of children
BM4-019M
until it is properly disposed of.
Oil must never get into water-
ways, the sewer system or the
ground.
Due to the disposal problem, it is
best to have the engine oil and filter
change carried out by a VW Marine
Service Partner.
INSPECTION