Stop Switch - Volkswagen Marine SDI Series Operating Manual

1 - Instrument lighting
The brightness of the instrument lighting
can be adjusted by pressing the button.
2 - Acknowledgement button
for acoustic signal
The acoustic signal of a fault message can
be acknowledged with this button.
3 - Button for MFI
The MFI is operated with this button. Each
time the button is pressed, the display in the
MFI is advanced.
4 - Stop engine
To stop the engine from the flying bridge,
press the Stop button.
5 - Start engine
When the ignition key is inserted and the
ignition is switched on in the navigation
stand panel, you can start the engine by
pressing the Start button.
Important
Always remove the ignition key if
you leave the boat - even for a
short time. This is particularly
important when children remain
on the boat. Otherwise they
could start the engine or operate
the electrical
Accident danger!
OPERATION

Stop switch

Stop switch
You can stop the engine in case of danger
with the Stop switch on the fuse box/relay
plate.
After the Stop switch is actuated it must be
released again, as otherwise the engine
cannot be started.
To release the Stop switch, turn it in the
direction of the arrow shown on the switch.
equipment.
OPERATION
BM4-003M
15
15