Volkswagen Marine SDI Series Operating Manual page 36

Remove the cover of the oil filter so that
the return valve opens and the used oil can
flow back into the oil sump.
Remove the protective cap by pressing
the lock -arrow- at the front and rear out of
the hose.
Route the end of the hose into the con-
tainer provided for the oil change.
INSPECTION
1
BM4-023M
Press and hold the button 2 fuse box/
relay plate with the engine stopped and the
ignition switched on until all engine oil is
completely pumped out.
After completing draining, remove the
hose from the oil change pump again and
refit the protective cap.
Tighten the oil filter cover with a tighten-
ing torque of 25 Nm.
Oil must never get into water-
ways, the sewer system or the
ground.
Due to the disposal problem, it is
best to have the engine oil and filter
change carried out by a VW Marine
Service Partner.
Engine oil additives
No lubricant additives are to be
added to the engine oil.
Damage resulting from such agents
is excluded from the warranty.
INSPECTION
BM4-009M
35
35