Hyundai HYM430SPR Instruction Manual page 7

General Safety
machine away from the area of spilled fuel and
avoid creating any source of ignition until the
fuel has evaporated and fuel vapours have
dissipated.
- Make sure to always put the tank and fuel
container caps back on and tighten well.
4. Make sure to replace faulty silencers.
5. You must check the general condition of the
machine before using and in particular:
- Check that the blade is not worn or
damaged. Replace the entire blade and all
worn or damaged fittings to preserve balance.
Any repairs must be done at a specialised
centre.
- Do not force the OPC safety lever as it must
move freely; it should return automatically and
quickly back to the neutral position, resulting
in the stopping of the blade.
Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating
or repairing the machine.
GLOVES
Protective electrically non-conductive gloves are highly recommended when working.
BOOTS
Non-skid heavy duty footwear are highly recommended when working.
HEARING PROTECTION
Suitable safety hearing protection is recommended.
EYE PROTECTION
Always wear safety glasses/goggles and/or face shields. Everyday eyeglasses have
only impact resistant lenses; they are not safety glasses/goggles.
CLOTHING
Do not wear loose clothing, gloves, scarfs, neckties or jewellery
(rings, wrist watches), which can be caught in moving parts.
6. Where applicable, check the battery status
regularly. If there is any damage to the casing,
cover or terminals, you must replace it.
7. Before you start work, always fit the exit
guards (grass collector, side discharge guard
or rear discharge guard).
!
8. WARNING - The noise and vibration
levels shown in these instructions are the
maximum levels for use of the lawnmower.
The use of an unbalanced blade, the
excessive speed of movement, or the absence
of maintenance have a significant influence on
noise emissions and vibrations. It is necessary
to take preventive steps to eliminate possible
damage due to high levels of noise and stress
from vibration. You must maintain the machine
well, wear ear protection and take breaks from
working.
7