Proline UFZ168 Instruction Manual page 19







1. Remove the screw (1) that fixes the upper hinge cover (2) and remove the upper
hinge cover.
2. Remove the screws that hold the upper hinge and remove the upper hinge.
3. Remove the upper hinge hole cover (4).
4. Lift the door and place it on a padded surface to prevent it from being
scratched.
5. Remove the screws (7) that hold the lower hinge (8) and then remove the lower
hinge.
6. Remove the foot (6). Then transfer and fix it to the opposite side.
7. Remove the bolt-pin cap (9). Remove the bolt-pin from the lower hinge and
reverse the lower hinge. Install the lower hinge to the opposite side with the
screws.
8. Install the bolt-pin to the lower hinge. Install the bolt-pin cap to the bolt-pin.
9. Fit the door onto the lower hinge.
10. While holding the door in the closed position, secure the upper hinge in the top
frame with screws.
11. Secure the upper hinge cover onto the upper hinge with the screw. Attach the
upper hinge hole cover to the top of the appliance.
EN-7