System Startup - Clevo NL40CU Concise User Manual

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Securely attach any peripherals you want to use with the computer
(e.g. keyboard and mouse) to their ports.
4. When first setting up the computer use the following procedure
(as to safeguard the computer during shipping, the battery will be
locked to not power the system until first connected to the AC/DC
adapter and initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack on the right of
the computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter. The battery will
now be unlocked.
5. Use one hand to raise the lid/LCD to a comfortable viewing angle (do
not exceed 180 degrees); use the other hand (as illustrated in
Figure 1) to support the base of the computer (Note: Never lift the
computer by the lid/LCD).
6. Press the power button on the left side of the computer to turn it on
(note that the lid/LCD must be open for the power button to
function).
System Software
Your computer may already come with system software pre-
installed. Where this is not the case, or where you are re-con-
figuring your computer for a different system, you will find
this manual refers to Microsoft Windows 10.
Intel® Optane™ Support
You need to setup Intel
®
Windows 10 operating system (see
on page 5).
4
Optane™ before installing your
Intel® Optane™ Setup
180 ﾟ
Note that you should always
shut your computer down by
choosing the Shut down
Model A
command in Windows (see
below). This will help pre-
vent hard disk or system
problems.
1. Click the Start Menu icon
Model B
2. Click the Power item
3. Choose Shut down
Figure 1 - Opening the Lid/LCD/Computer with
AC/DC Adapter Plugged-In
Shut Down
.
.
from the menu.