Table of Contents
Advertisement
Attaching HDMI Cable Ferrites
Complete the following instructions to attach the snap-on cable ferrites included with your kit to your
HDMI cable. Install one ferrite at each end of the HDMI cable.
1.
Open the ferrite by unsnapping the clasp.
2.
Place the HDMI cable inside the ferrite.
3.
Close the ferrite around the cable until it snaps into place.
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle
logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at
ni.com/trademarks for other National Instruments trademarks. Other product and company
names mentioned herein are trademarks or trade names of their respective companies. For patents
covering National Instruments products/technology, refer to the appropriate location: Help»Patents
in your software, the patents.txt file on your media, or the National Instruments Patent Notice
at ni.com/patents. Refer to the Export Compliance Information at ni.com/legal/
export-compliance for the National Instruments global trade compliance policy and how to
obtain relevant HTS codes, ECCNs, and other import/export data.
© 2011 National Instruments Corporation. All rights reserved.
375651A-01
Apr11
Advertisement
Table of Contents
