Table of Contents
Advertisement
21 | Keysight | Sourcing Precise Current/Voltage Sinusoidal Waveforms Using the B2961A/62A – Demo Guide
12) Rotate
to select Source trigger count and press
of trigger signals that will be sent to the instrument as Source trigger count.
13) You can also press
to set it to INFINITE if you want to continuously source a sinusoid
waveform after triggering.
Note: You need to manually abort the output to make the instrument return to an idle state when
Source trigger count is set to INFINITE.
14) Press
to make the instrument be ready to receive an external trigger signal.
(The status information will show
Now the instrument has been ready to receive an external trigger signal.
Result on Oscilloscope
to edit it. Then enter the number
while the waveform is being sourced.)
Output signal
from a channel
Trigger Input
via Digital I/O
Advertisement
Table of Contents
