Installation Instructions (Optional); Location; Window Slider Kit Installation - Beko BEPN 09C User Manual

7

Installation instructions (optional)

A: 30cm-100cm B: ≥30cm
Horizontal
window
Window Slider Kit
Minimum: 67.5cm (2.22ft).
Maxmum: 123cm (4.04ft).
Horizontal
window
Window Slider Kit
Minimum: 67.5cm (2.22ft).
Maxmum: 123cm (4.04ft).
bolt
Window
slider kit
Mobile type air conditioners (local air conditioners) / User Manual

7.1 Location

• The air conditioner should be placed on a firm foundation to
minimize noise and virbration. For safe and secure positioning,
place the unit on a smooth, level floor strong enough to
support the unit.
• The unit has casters to aid placement, but it should only be
Fig. 5
rolled on smooth, flat surfaces. Use caution when rolling on
carpet surfaces. Do not attempt to roll the unit over objects.
• The unit must be placed within reach of a properly rated
grounded socket.
• Never place any obstacles around the air inlet or outlet of the
unit.
• Allow 30cm to 100cm of space from the wall with for efficient
air-conditioning.
Fig. 6

7.2 Window slider kit installation

Your window slider kit has been designed to fit most standard
"Vertical" and "horizontal" window applications, However, it may
be necessary for you to improvise/modify some aspects of the
installation procedures for certain types of window. Please refer
to Fig. 6 & Fig. 7 for minimum and maximum window openings.
Window slider kit can be fixed with a bolt (see Fig. 7a).
Fig. 7
C
Fig. 7a
Note: If the window opening is less than the
mentioned minimum length of the window slider
kit, cut that one with a hole in it short to fit for
the window opening.
Do never cut out the hole in window slider kit.
17 / 28 EN