Pair The Scanner With The Apple Device; Unpairing The Scanner From Your Ipad Or Iphone; Beep Settings - Socket 7Ci Quick Start Manual

5. Pair the Scanner with the Apple device:

- Power on the Scanner
- Make sure the scanner is set to HID
Keyboard mode (default). If needed,
scan this barcode to set it to the
correct mode. The CHS will beep 3
times.
- Enable Bluetooth on the Apple device. Search for Bluetooth devices
- In the list of found devices, select Socket CHS [xxxxxx]. If
prompted, tap Pair.
6. Unpairing the scanner from your iPad or
iPhone
Power on the scanner. Press and hold the
TRIGGER and the POWER button together. After
you hear 3 beeps, release both buttons. The
scanner will unpair and power off.

7. BEEP Settings

Enables the Scanner to beep to indicate successful scans.
Disables the Scanner from beeping to indicate successful scans.
For full instructions visit:
http://www.socketmobile.com/pdf/data-collection/chs-7c_qs.pdf
Please call our support team if you need assistance
setting up your rental devices - 1(800) 622-6484
page 2 of 3