Safety With Electricity; Prevent Electrostatic Discharge Damage - Cisco 1100 Series Hardware Installation Manual

Safety With Electricity

Warning
Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040.
Safety With Electricity
Warning Only skilled person should be allowed to install, replace, or service this equipment. Refer to statement 1089
for description of skilled person. Statement 1090
Warning Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
Warning
This unit might have more than one power supply connection. To reduce risk of electric shock, all connections
must be removed to de-energize the unit. Statement 1028
Warning Instructed person is someone who has been instructed and trained by a skilled person and takes the necessary
precautions when working with equipment. Skilled person/Qualified personnel is someone who has training
or experience in the equipment technology and understand potential hazards when working with equipment.
Statement 1089

Prevent Electrostatic Discharge Damage

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. It can occur if electronic
printed circuit cards are improperly handled and can cause complete or intermittent failures. Always follow
ESD prevention procedures when removing and replacing modules:
• Ensure that the router chassis is electrically connected to ground.
• Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip to an
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
12
unpainted surface of the chassis frame to channel unwanted ESD voltages safely to ground. To guard
against ESD damage and shocks, the wrist strap and cord must operate effectively.
Prepare for Router Installation