LW Scientific MX12 Instruction Manual

Download this manual

Introduction

The LW Scientific MX12 centrifuge is a 24-place microhematocrit centrifuge for spinning full-size 75 mm capillary tubes.

The unit is small, conserving counter space in the lab, but also sturdy with suction-cupped feet for stability. The RPM /

RCF button toggles between displaying RPM or RCF (g-force). The digital controls allow speed and time to be adjusted

with the touch of a finger and will show real-time speed and time remaining. The maintenance-free, brushless motor

spins at 12,000 rpm producing rapid PCV results. The included reader lid allows results to be read while still on the rotor.

P. 770.270.1394

MX12 Centrifuge

F. 770.270.2389

865 Marathon Parkway Lawrenceville GA 30046

Instruction Manual

Designed, Engineered &

Assembled Proudly in America

Need help?

Do you have a question about the MX12 and is the answer not in the manual?

Page 1 Assembled Proudly in America Introduction The LW Scientific MX12 centrifuge is a 24-place microhematocrit centrifuge for spinning full-size 75 mm capillary tubes. The unit is small, conserving counter space in the lab, but also sturdy with suction-cupped feet for stability. The RPM / RCF button toggles between displaying RPM or RCF (g-force).
Page 2 •24- place flat rotor with reader lid for 75 mm capillary tubes LW Scientific packs each MX12 centrifuge with utmost care. All units undergo a QC check prior to shipping from LW Scientific headquarters in Lawrenceville, GA to ensure proper operation. Examine the outer and inner containers for any visible damage, and retain the packing material.
Page 3 Because of safety issues with high g-forces in a centrifuge, it is recommended that rotors be inspected monthly for wear and fatigue. If there is any indication of wear, the rotor should be removed from service. Contact LW Scientific for return instructions so the rotor can be evaluated by a technician for repair or replacement.
Page 4 Over Power Input voltage is more than 240V Check voltage at wall outlet No Speed Motor is damaged Contact LW Scientific Confirm all wires are connected Main Contact Failure MCB or UIB is not working at circuit boards Lack of Speed...