Calling up and Closing the User Menu / OSD
Calling up and closing the user menu / OSD
1. Make sure that a USB mouse is connected
to the FLEXACAM C1 and in the case of a
wireless mouse the mouse is switched on.
2. Move the USB mouse and then the OSD
menu appears on the left side of the screen.
3. Click on a symbol to start a process or open
a menu for further operating steps.
4. If your mouse cursor is not over the menu
bar or on an open panel the OSD menu will
disappear after a second when no further
movement of the mouse is recognised.
FLEXACAM C1 User Manual
User Menu – On-Screen Display (OSD)
36