Switching on the FLEXACAM C1
PC mode
Installation and connection
1. Set the ON / OFF switch to "ON" to switch
on the FLEXACAM C1.
2. The status light's LED switches from
blinking green to continuously green,
a signal tone sounds and the live image is
displayed on the computer – the FLEXA-
CAM C1 camera is ready to use.
3. Start Leica Application Suite X (LAS X).
4. Follow the instructions in the software for
adjusting and acquiring an image.
FLEXACAM C1 User Manual
For additional information on Leica
Application Suite X, please refer to "LAS X
Help".
You may be asked to specify your micro-
scope's current instrument configura-
tion when starting LAS X for the first time.
For the image source section, select the
"Flexacam camera" menu entry to select the
FLEXACAM C1.
PC Operation Installation / Setup / Application
32