Switching on the FLEXACAM C1
HD mode (stand-alone)
Ensure that the camera can receive light
from the microscope and is connected to
a HD / 4K monitor and a power supply.
FLEXACAM C1 User Manual
1. Set the ON / OFF switch to "ON" to switch
on the FLEXACAM C1.
2. During the boot sequence the status LED is
blinking green and switches to a continu-
ously green the moment it is ready to use.
Now the live image and the OSD are avail-
able throughout the connected HDMI
monitor.
3. The camera automatically detects the
HD / 4K monitor.
Stand-Alone Operation Installation / Setup / Application
21