Configuring the Footswitch
Installation of hand / footswitch
Plug the hand / footswitch with the 2.5 mm
phone jack in the designated connection port
at the rear side of the "FLEXACAM C1".
FLEXACAM C1 User Manual
Configuring the button function
1. Open "Settings" in the menu.
2. Go to the entry "Footswitch" and select
the
function
assigned
"Hand / footswitch".
Capture = Capture an image
Record = START and STOP the recording
of a movie
WB
= White balance
Stand-Alone Operation Installation / Setup / Application
for
pressing
25