Safety Instructions - Leica FLEXACAM C1 User Manual

Safety Instructions

Description
The individual modules fulfill the high
O
requirements for observation and docu-
mentation of the FLEXACAM C1 microscope
camera.
Intended use
Refer to "Safety Concept" booklet
O
Non-intended use
Refer to "Safety Concept" booklet
O
Never use the FLEXACAM C1 or its components
for diagnostic procedures if it is not expressly
intended for such use.
The instruments and accessories described in
this User Manual have been tested for safety
and potential hazards.
FLEXACAM C1 User Manual
The responsible Leica affiliate must be consul-
ted whenever the instrument is altered, modi-
fied or used in conjunction with non-Leica
components that are outside of the scope of
this manual!
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims.
Place of use
Refer to "Safety Concept" booklet
O
Electrical components must be placed at
O
least 10 cm away from the wall and from
flammable substances.
Avoid large temperature fluctuations, direct
O
sunlight and vibrations. These conditions
can distort the functionality of the camera.
General Notes
In warm and damp climates, the individual
O
components require special care in order to
prevent the build-up of fungus.
Responsibilities of person in charge of
instrument
Refer to "Safety Concept" booklet
O
Ensure that:
The FLEXACAM C1 and accessories are
O
operated, maintained and repaired by
authorized and trained personnel only.
All operators have read, understood and
O
observe this User Manual, and particularly
the safety regulations.
8