Table of Contents
Advertisement
p
o
r
t
This
0
represents a
display station
with an address
of
0
on port
3.
An E on your display represents an extra work station. If there are any Es on
your display, the extra work stations must be removed. Contact the person who
planned the setup if you need assistance.
There may be additional two-digit codes beside some of the Os on the display.
These codes will be entered on your display later in this chapter.
An explanation of the setup display is provided in the example
below.
Address
r----------------------------------------------------~
o
2
3
4
5
6
0/
D
p
1/
D
2/
D
3/
D
1->
00
2-> 01
3-> 0010001000
This
P
represents
printer witl
address of
port
O.
Entry
~
Field
22-07
------------------------------------------~
Cursor Location (This is not an error code.)
Study the above example before you continue.
22
Control Unit Setup Procedure
Advertisement
Table of Contents
