Table of Contents
Advertisement
I
You only need to perform this procedure on one of the display stations.
If the display station is a 5292 Model 1 or Model 2, a 5291, or a
5251 Model 11, press the Command
(cmd
I
key; then
press the
OEJ[)
(see illustration below) key on the display
station keyboard.
If the display station is a 3179 Model 2, a 3180 Model 2, or a
3196 without the Enhanced iKeyboard, press and hold the
Alt
~
key; then press the Test
lSI
key.
.... Frame 3.4
111111,.... Continued
If an error code appears in the upper left corner of the display after you press
these keys, press the Reset key and repeat Step 3.4.
Chapter 3. Setup Display Configuration
19
Advertisement
Table of Contents
