• To change the order of the
• To insert an additional point on
• To remove the point from the
6
Viewing a Route on the Map
1 Select Route Planner.
2
3
Deleting a Route
1 Select Route Planner.
2
3
Navigating a Saved Route
Before you can navigate using a
saved route, you must create a
route.
1 Select FIND > Routes.
2
3
11111111
points on the route, select
Move Up or Move Down.
the route, select Insert.
The additional point is inserted
before the point you are editing.
route, select Remove.
Select QUIT to save the route.
Select a route.
Select View Map.
Select a route.
Select Delete Route.
Select a route.
Select Go.
II
.
cp
.
Viewing the Active Route
1 While navigating a route, select
Active Route.
2
Select a point in the route to
view additional details.
Stopping Navigation
Select FIND> Stop
Navigation.
Reversing a Route
1 Select Route Planner.
2
Select a route.
3
Select Reverse Route.
Tracks
A track is a recording of your path.
The track log contains information
about points along the recorded
path, including time, location, and
elevation for each point.
Tracks Settings
Select Setup > Tracks.
Track Log: Turns track recording
on or off.
Record Method:Sets a track
recording method. Auto
records the tracks at a variable
15
.
cp
.
111111