Installing Batteries; Turning On The Device - Garmin GPSMAP 64s Owner's Manual

temperature range of
(32°
You can charge the battery using a
standard wall outlet or a USB port
on your computer.
1
2
3
4
5
•••
0°
to 122°F).
Pull up the weather cap
the mini-USB port @.
Plug the small end of the USB
cable into the mini-USB port.
Plug the USB end of the
cable into the AC adapter or a
computer USB port.
Plug the AC adapter into a
standard wall outlet.
When you connect the device
to a power source, the device
turns on.
Charge the battery completely.

Installing Batteries

to 50° C
The handheld device operates
using two AA batteries (not
included). Use NiMH or lithium
batteries for best results.
CD
1
Turn the D-ring counter-
from
clockwise, and pull up to
remove the cover.
2 Insert two AA batteries,
observing polarity.
3
Replace the battery cover, and
turn the D-ring clockwise.
4
Hold
5 Select Setup > System > AA
Battery Type.
6
Select Alkaline, Lithium,
Traditional NiMH, or
Precharged NiMH.

Turning On the Device

6 .
Hold
11
6 .