Connecting The Device To Your Computer - Garmin GPSMAP 64s Owner's Manual

You can install a microSD memory
card in the handheld device for
additionalstorage or pre-loaded
maps.
1 Turn the D-ring counter-
2 Remove the battery.
3 Slide the card holder
4 Place the memory card with the
5 Close the card holder.
6 Slide the card holder to
7 Replace the battery and cover.
clockwise, and pull up to
remove the cover.
<D
and lift up.
gold contacts facing down.
' ---- -- J
ii
0
( : !
_)
--
lock it.
Connecting the Device to
Your Computer
To prevent corrosion, thoroughly
dry the mini-USB port,the weather
cap, and the surrounding area
before charging or connecting to a
computer.
ii
to
Before you can operate your device
while connected to your computer,
you must install batteries. The
computer USB port may not provide
enough power to operate the
device.
'
1 Pull up the weather cap from
(>
the mini-USB port.
2 Plug the small end of the USB
cable into the mini-USB port.
3 Plug the large end of the USB
cable into a computer USB
port.
to
1111
On Windows computers, the
device appears as a removable
drive or a portable device, and
the memory card may appear
as a second removable drive.
On Mac computers, the device
47
NOTICE