Navigating With Sight 'N Go - Garmin GPSMAP 64s Owner's Manual

near the course, such as shoals or
submerged rocks.
To enable the course pointer, from
the compass, select MENU
> Setup Heading > Go To Line/
Pointer > Course (COl).
The course pointer
your relationship to the course
line leading to the destination.
The course deviation indicator
(CDI)
of drift (right or left) from the
course. The scale
distance between dots
course deviation indicator, which
tell you how far
are.
1
G)
indicates
®
provides the indication
@ refers to the
@
off
course you

Navigating with Sight 'N Go

You can point the device at an
object in the distance, lock in the
direction, and navigate to the
object.
1 Select Sight 'N Go.
2 Point the device at an object.
3 Select Lock Direction > Set
Course.
4 Navigate using the compass.
Heading Settings
You can customize the compass
settings.
Select Setup > Heading.
Display: Sets the type of directional
heading shown on the compass.
North Reference: Sets the north
reference used on the compass.
Go To Line/Pointer: Sets the
behavior of the pointer that
appears on the map. Bearing
points in the direction of your
on the
destination. Course shows your
relationship to the course line
leading to the destination.
Compass: Automatically switches
from an electronic compass
20