Do not attempt to use the device to charge a battery that was not provided by Garmin ® . Attempting to charge a battery that was not provided by Garmin can damage the device and void the warranty.
Replace the battery cover, and turn the D-ring clockwise. Select Waypoint Manager. Hold . Select a waypoint. Select Setup > System > AA Battery Type. Select an item to edit, such as the name. Select Alkaline, Lithium, Traditional NiMH, or Precharged Enter the new information, and select Go.
Follow the on-screen instructions. NOTE: Sight 'N Go is available only on the GPSMAP 64s and Getting More Information GPSMAP 64st. You can find more information about this product on the Garmin Select Sight 'N Go. website. Point the device at an object.
Place the memory card with the gold contacts facing down. Close the card holder. Slide the card holder to to lock it. Replace the battery and cover. Attaching the Wrist Strap Insert the loop of the wrist strap through the slot in the device.
Page 6
Garmin ® , the Garmin logo, and GPSMAP ® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ANT+™ and Garmin Express™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.
Need help?
Do you have a question about the GPSMAP 64 and is the answer not in the manual?
Questions and answers