Greenlee DM-25 Instruction Manual page 4

Important Safety Information
Electric shock hazard:
• The test leads supplied with this product comply with IEC 61010-
031:2008, UL 61010-031:2010 and CAN/CSA-C22.2 NO. 61010-031A-
07–Amendment 1:2010. These safety standards limit the exposed length
of the probe tip to 4 mm for measurement category III. These test leads
include a cap that must be in place when used in measurement category
III applications.
• Do not apply more than the rated voltage between any two input termi-
nals, or between any input terminal and earth ground.
• Do not contact the test lead tips or any uninsulated portion of the
accessory.
Failure to observe these warnings could result in severe injury or death.
4
Electric shock hazard:
Contact with live circuits could result in severe injury
or death.