9305 Rear I/O Modules - Cobalt Digital Inc 9305 Product Manual

2

9305 Rear I/O Modules

Table 2-1 9305 Rear I/O Modules
9305 Rear I/O Module
RM20-9305-A
RM20-9305-A/S
2-4
Table 2-1 shows and describes the full assortment of Rear I/O Modules
specifically for use with the 9305.
Notes: • Rear I/O Modules equipped with 3-wire Phoenix connectors are supplied
with removable screw terminal block adapters. For clarity, the adapters are
omitted in the drawings below.
9305 PRODUCT MANUAL
Description
Provides the following connections:
• HD/SD-SDI coaxial input (SDI IN)
• Four reclocked SDI input copies (RCK OUT 1- 4)
• Four buffered SDI coaxial outputs (SDI OUT 1- 4)
Split Rear Module. Provides each of the following
connections for two 9305 cards:
• HD/SD-SDI coaxial input (
• HD/SD-SDI reclocked input copies (
)
RCK OUT 2
• Buffered SDI coaxial outputs (
)
SDI OUT 2
Note: RM20-9305-A/S Rear I/O Module compatible
only with 20-slot frames.
Installing a Rear I/O Module
)
SDI IN
RCK OUT 1 and
SDI OUT 1 and
9305-OM (V4.1)