Cobalt Digital Inc 9305 Product Manual page 15

Introduction
9305-OM (V4.1)
•
Built-in Card Edge User Interface – Using the built-in card edge
controls and display, card control settings can be set using a front
panel menu which is described in Chapter 3,"Operating Instructions".
Note: Some of the 9305 functions described in this manual are available only when
using the DashBoard™, or Cobalt
Control Panel user interfaces.
•
DashBoard™ User Interface – Using DashBoard™, the 9305 and
other cards installed in openGear®
HPF-9000 or 8321 Frame can be controlled from a computer and
monitor.
DashBoard™ allows users to view all frames on a network with
control and monitoring for all populated slots inside a frame. This
simplifies the setup and use of numerous modules in a large
installation and offers the ability to centralize monitoring. Cards
define their controllable parameters to DashBoard™, so the control
interface is always up to date.
The DashBoard™ software can be downloaded from the Cobalt
Digital Inc. website: www.cobaltdigital.com (enter "DashBoard" in
the search window). The DashBoard™ user interface is described in
Chapter 3,"Operating Instructions".
Note: If network remote control is to be used for the frame and the frame has not yet
been set up for remote control, Cobalt
Control User Guide" (PN 9000RCS-RM) provides thorough information and
step-by-step instructions for setting up network remote control of
®
Compass cards using DashBoard™.
Download a copy of this guide by clicking on the DashBoard Control and
Monitoring link at www.cobaltdigital.com and then select DashBoard Remote
Control Manual as a download, or contact Cobalt
Digital Inc. (p. 1-16).
• ®
Cobalt
Control Panels – The OGCP-9000, OGCP-9000/CC, and WinOGCP
Remote Control Panels conveniently and intuitively provide
parameter monitor and control of the cards within the 20-slot frame.
The remote control panels allow quick and intuitive access to
hundreds of cards in a facility, and can monitor and allow adjustment
of multiple parameters at one time.
The remote control panels are totally compatible with the openGear
control software DashBoard™; any changes made with either system
are reflected on the other.
1. openGear® is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross
Video Limited.
9305 PRODUCT MANUAL
®
OGCP-9000 or OGCP-9000/CC Remote
®
reference guide "Compass
OGCP-9000, OGCP-9000/CC and WinOGCP Remote
9305 Functional Description
1
frames such as the Cobalt
®
as listed in Contact Cobalt
®
®
Remote
®
1-11