Cobalt Digital Inc 9305 Product Manual page 39

Operating Instructions
Table 3-2 9305 Function Submenu List — continued
• Mono Mix as Source
• Tone Generator 1 thru 4 as Source
• Silence (Mute) as Source
• Gain (dB) Control
• Muting Control
• Phase Control
9305-OM (V4.1)
9305 Function Submenu List and Descriptions
(continued)
Mono selection in Source drop-down list allows mono mix content to be
the source for the selected destination Embedded Audio Group channel.
(In this example, the mono content is the source for destination
Embedded Ch 1)
Note: Mono mix content is set up using Mono Mixer Selection in the
Audio Mixing function). Refer to Audio Mixing function
description on page 3-21 for more information.
Tone Generator 1 thru Tone Generator 4 range in Source drop-down list
enables one of four tone generators (Tone 1 thru Tone 4) to be the source
for the selected destination Embedded Audio Group channel.
(In this example, Tone 1 (tone generator 1) is the source for destination
Embedded Ch 1)
Note: Tone generator frequencies can be independently set for the four
tone generator sources.
Refer to Tone Generator function description on page 3-21 for
more information.
Silence selection in Source drop-down list mutes the selected destination
Embedded Audio Group channel. Use this setting for unused
destination channels.
(In this example, silence (muting) is applied to Embedded Ch 1)
Adjusts relative gain (in dB) applied to the corresponding destination
Embedded Audio Group channel.
(-80 to +40 dB range in 0.1 dB steps; unity = 0.0 dB)
Allows pushbutton On/Off channel muting while saving all other settings.
Selects between Normal and Invert phase (relative to source original
phase) for the destination Embedded Audio Group channel.
9305 PRODUCT MANUAL
3-13