9922-2Fs Rear I/O Modules; Technical Specifications - Cobalt Digital Inc 9922-2FS Product Manual

Introduction

9922-2FS Rear I/O Modules

Technical Specifications

Table 1-1 Technical Specifications
Item
Part number, nomenclature
Installation/usage environment
Power consumption
Installation Density
Environmental:
Operating temperature:
Relative humidity (operating or storage):
Frame communication
Indicators
Serial Digital Video Input
9922-2FS-OM (V1.8)
The 9922-2FS physically interfaces to system video connections at the rear of
its frame using a Rear I/O Module.
All inputs and outputs shown in the 9922-2FS Functional Block Diagram
(Figure 1-1) enter and exit the card via the card edge backplane connector.
The Rear I/O Module breaks out the 9922-2FS card edge connections to BNC
and other connectors that interface with other components and systems in the
signal chain.
The full assortment of 9922-2FS Rear I/O Modules is shown and described in
9922-2FS Rear I/O Modules (p. 2-4) in Chapter 2, "Installation and Setup".
Table 1-1 lists the technical specifications for the 9922-2FS 3G/HD/SD-SDI
Dual-Channel Frame Sync with Audio/Video Processing, AES/Analog Audio
Embedding/De-Embedding, and CVBS I/O card.
9922-2FS 3G/HD/SD-SDI Dual-Channel Frame Sync with Audio/
Video Processing, AES/Analog Audio Embedding/De-Embedding,
and CVBS I/O
Intended for installation and usage in frame meeting openGear™
modular system definition
< 18 Watts maximum
Up to 20 cards per 20-slot frame
32° – 104° F (0° – 40° C)
< 95%, non-condensing
10/100/1000 Mbps Ethernet with Auto-MDIX
Card edge display and indicators as follows:
• 4-character alphanumeric display
• Status/Error LED indicator
• Input Presence LED indicators
Number of Inputs:
Up to (4), with manual select or failover to alternate input
Data Rates Supported:
SMPTE 424M, 292M, SMPTE 259M-C
9922-2FS PRODUCT MANUAL
Technical Specifications
Characteristic
1-19