Cobalt Digital Inc 9305 Product Manual page 57

Operating Instructions
Indicator Icon or Display
9305-OM (V4.1)
DashBoard™ Status/Error Indicators and Displays
Figure 3-7 shows and describes the DashBoard™ status indicators and
display. These indicator icons and displays show status and error conditions
relating to the 9305 card itself and remote (network) communications.
Red indicator icon in Card Access/Navigation Tree pane shows card with Error
condition (in this example, the Card Access/Navigation Tree pane shows a general
error issued by the 9305 card in slot 6).
Specific errors are displayed in the Card Info pane (in this example "No connection
to device" indicating 9305 card is not connecting to frame/LAN).
If the 9305 card is not connecting to the frame or LAN, all controls are grayed-out (as
shown in the example here).
Gray indicator icon in Card Access/Navigation Tree pane shows card(s) are not
being seen by DashBoard™ due to lack of connection to frame LAN (in this
example, both a 9305 card in slot 6 and the MFC-8320-N Network Controller Card
for its frame in slot 0 are not being seen).
Yellow indicator icon in Card Access/Navigation Tree pane shows card with Alert
condition (in this example, the Card Access/Navigation Tree pane shows a general
alert issued by the MFC-8320-N Network Controller Card).
Clicking the card slot position in the Card Access/Navigation Tree (in this example
Network Controller Card "Slot 0: MFC-8320-N") opens the Card Info pane for the
selected card. In this example, a "Fan Door Open" specific error is displayed.
Reference Standard display showing INVALID message indicates incompatible or no
reference signal present on indicated external reference input (in this example,
message shows an invalid or missing signal on external Reference 1).
Figure 3-7 DashBoard™ Status Indicator Icons and Displays
9305 PRODUCT MANUAL
Error Description
Troubleshooting
3-31