Processor / Memory; Usb Ports; Sd Memory Card Slot - Measurement Computing WebDAQ 316 User Manual

Factory default se ngs
Table 6. Factory default se ngs
Parameter
Factory default IP
address
Factory default
subnet mask
Factory default
gateway
Factory default
DHCP se ng
Factory default
password for
admin account
Factory default
password for share
account
Factory default
device name
Note 3. Shared folders and mapped drives are reset when factory defaults are restored.

Processor / Memory

Table 7. Processor / memory specifica ons
Parameter
Microprocessor
Memory

USB ports

Table 8. USB specifica ons
Parameter
Number of USB
ports
USB device type
Device
compa bility
Note 4. The USB ports are provided for connec on to a mass storage device or approved WiFi adapter.

SD memory card slot

Table 9. SD card specifica ons
Parameter
Memory card type
File systems
supported
Specifica on
192.168.0.101
255.255.255.0
192.168.0.1
DHCP + link-local enabled
admin
Passwords are case sensi ve and can be changed using the web interface.
share
Passwords are case sensi ve and can be changed using the web interface.
webdaq-xxxxxx, where xxxxxx is the last 6 digits of the MAC address (printed on the
label on the underside of the device).
Specifica on
Type: Quad core Broadcom BCM2837
Speed: 1.2 GHz
RAM: 1 GB LPDDR2
Flash: 4 GB eMMC (3 GB available for user data storage)
Specifica on
Two
USB 2.0 (high-speed)
USB 1.1, USB 2.0, USB 3.0
Specifica on
SD, SDHC, SDXC, MMC, TransFlash
FAT16, FAT32, exFAT, ext2/3/4, NTFS
WebDAQ 316 User's Guide
page 25