Page 3
Getting started with the USB-525 Getting started with the USB-525 This quick start explains to configure and log data with a USB-500 Series temperature/humidity data logger using the USB-525 Logger Assistant for the first time. Minimum and recommended system requirements ...
Page 4
Example: Configuring a data logger Example: Configuring a data logger For a simple example of configuring a USB-500 Series data logger using the USB-525, complete the following steps: With the USB-525 powered on, insert a compatible USB-500 Series data logger into the USB port on the top of the USB-525.
Page 5
Example: Configuring a data logger Download and view logger data To download logger data and view the data graphically on the USB-525, complete the following steps: Insert the logger into the USB port on the top of the USB-525. Press Stop Logger &...
Page 6
For more information about using the USB-525 to configure and view data from USB-500 Series data loggers, refer to the following documents: USB-525 Logger Assistant section of the USB-500 Data Logger Application Help. USB-500 Series data sheet www.mccdaq.com/pdfs/specs/USB- 500-Series_data.pdf...
Trademark and Copyright information Measurement Computing Corporation and the Measurement Computing logo are either trademarks or registered trademarks of Measurement Computing Corporation. Refer to the Copyrights & Trademarks section on mccdaq.com/legal for more information about Measurement Computing trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Page 8
Notice Measurement Computing Corporation does not authorize any Measurement Computing Corporation product for use in life support systems and/or devices without prior written consent from Measurement Computing Corporation. Life support devices/systems are devices or systems which, a) are intended for surgical implantation...
Need help?
Do you have a question about the USB-525 Logger Assistant and is the answer not in the manual?
Questions and answers