fischertechnik ROBOTICS TXT Discovery Set Manual page 29

TXT
Discovery Set
Task 2: Remote control of robot
Note: This task requires a WLAN connection between the
TXT Controller and your PC. The process for completing this
connection is described in the instruction manual for the TXT
Controller.
Tips:
After successfully completing the WLAN connection, open the
appropriate program with the icon.
Change to the control panel and look for the
interface for remote control of the model there.
Start the program in the online mode. Now you can use the various
buttons on the remote control to control the robot and you can also see
where it is going. If you overlook an obstacle, it will be detected by the
bumper and the model will automatically move back a short distance.
Have fun exploring the area!
ROBOTICS
29
Hindrance_detector_camera_2.rpp