First Steps - fischertechnik ROBOTICS TXT Discovery Set Manual

TXT
Discovery Set

First Steps

Now that you have made all of the
preparations and read the information, you can
finally start working.
This chapter describes how to:
▯ build the first simple model, a ventilating fan, and connect it to the
ROBOTICS TXT Controller,
▯ connect the ROBOTICS TXT Controller to the power supply and PC,
▯ load the ROBO Pro Software and test the model,
▯ load and start a ROBO Pro program, and
▯ create and start your first simple program with ROBO Pro
Click here, to see the first, easy-to-understand steps.
concentrate; then you will have that much more fun with the models
later.
ROBOTICS
Since you will be working particularly with the
ROBO Pro Software in addition to the fischertechnik
components themselves, you should be familiar with the
details for writing programs. And because this is explained
very clearly in Chapters 3 and 4 of the ROBO Pro Help, it
is best at this point to continue by working through these
chapters carefully.
The following tip also applies here: Take your time and
14