Table of Contents
Advertisement
Using the Send Setup Command
43
Data exchange between PDA & Machine
Hint:
An easy way to keep track of machine names is to
begin with the first machine to your left as you enter a
location and work clockwise around the room, or
physically mark the machine with a property tag or
magic marker.
4.
When initialization is complete the screen will
display Operation completed . Tap on Back to
return to the Select a command screen.
The Send Setup command transfers a washer or
dryer template, created in the Management Software,
to a machine.
1.
Aim the infrared port on the PDA at a 90 degree
angle to the machine's receiver.
2.
Tap on Send Setup , from the Select a
command screen on the PDA.
3.
Select the appropriate Setup Template , then tap
on Send .
Advertisement
Table of Contents
