Table of Contents
Advertisement
Setting Service Person IDs (continued)
27
ADVANTECH
6.
Repeat steps 1-5 to create additional Service
Person IDs.
7.
Click on Exit when you are finished adding
Service Person IDs.
Hints:
•
Longer passwords are more secure; however
choosing a password that is too long can be
cumbersome to enter into the PDA.
•
Click on the View Existing IDs button to see IDs
you have already setup.
Note:
If you delete a Service Person ID , that
information is deleted from the active list only. This
information still resides in the database so you can
still view who is responsible for past audits.
Setting the Software Update Password
The Software Update Password is used to secure
the upgrade process when needing to change the
Whirlpool imbedded software of the machine's control
board. The process will copy new software from the
PDA to the control board of the machine by n infrared
beam. This will only be required if Whirlpool issues
new machine control board software also called
firmware . The Software Update Password is not
mandatory and should only be used for additional
security.
1. Select Passwords , then Set Software Update
Password from the menu.
2. Enter the New Software Update Password and
press [Tab] .
3. Enter the Software Update Password again to
confirm, then click on Enter .
4. Click on OK .
™
Management Software Setup
Advertisement
Table of Contents
