Table of Contents
Advertisement
™
ADVANTECH
Management Software HotSync
Downloading Machine Setup Data to the Palm
Once you have setup your passwords, locations, and
templates you can download the information from the
PC to the PDA via the HotSync
be in Open-Access Mode until the first HotSync
operation is performed. In Open-Access mode your
machines are vulnerable to any PDA with the Handheld
Software loaded on them, however, only a limited
number of utilities are available in this mode: Get/Set
Time, Get Setup, Start/End Cycles, Audit Count,
Service Mode, and Run Diagnostics. It is recommended
that you sync your PDAs with the Management
Software and initialize your machines as soon as
possible after installation. After the first HotSync
operation has been performed the PDAs will then be in
Synced Mode , where all features will become
available.
Before performing a HotSync
Management Software has been launched on the PC
and that the Palm
page 15 of this manual for instructions on installing the
Handheld Software.
1.
Click on PDA Sync .
2.
3.
Press the HotSync
or cable.
4.
When the HotSync
the PC, then click on Exit . The Palm
will look like this:
™
5.
On the Palm
icon, located to the left of the Graffiti
will display the main menu screen on the PDA.
™
Handheld via a HotSync
®
process. The PDA will
®
operation, make sure the
™
handheld is in its cradle. Refer to
Click on Execute
PDA Data Transfer .
®
button on the HotSync
®
operation is complete, click OK on
handheld, use the stylus to tap the Home
®
®
®
®
cradle
™
handheld screen
®
writing area. This
36
Advertisement
Table of Contents
