V.ORLANDI RP10 Installation, Operating And Maintenance Instructions page 63

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
This chapter refers to the figures on pages 27-32/36.
Read the following instructions carefully before any operation:
7.1 FIFTH WHEEL BEARINGS REPLACEMENT
CAUTION: make sure that the wedge (11b) and the jaw (7) are
clearly
visible and the operating handle (19c) is regularly back in
7.1.1 FIFTH WHEEL WITH RUBBER BEARINGS
The following steps 1, 2, 4, 5, 7 and 8 must also be repeated on the
Unscrew the four screws (3a) and retrieve the washers (25) and nuts
1)
(26). Dispose
2) Remove the fixing plate (27) and the lower rubber bearing (28).
Dispose as specified in section 9 - DISPOSAL - page 34/36;
FIFTH WHEEL Rp10
7 REPAIRS
Wear safety shoes and safety gloves!
3a
3a
PAG.
27/36
CHAP. 7
REV. 00