V.ORLANDI RP10 Installation, Operating And Maintenance Instructions page 62

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
6 ASSEMBLY OF THE OPERATING HANDLE EXTENSION
This chapter refers to the figure on page 26/36.
Read the following instructions carefully before starting any
operation:
Wear safety gloves!
Disassemble the operating handle by removing the three M8 bolts (21b
1)
21c);
2)
Position the operating handle extension (21a) in so that it fits under the
operating handle and tighten it back up with the three M8 bolts, at a 25
FIFTH WHEEL Rp10
21b
21a
21c
19c
PAG.
26/36
CHAP. 6
REV. 00