V.ORLANDI RP10 Installation, Operating And Maintenance Instructions page 61

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
1a
1b
9) Tighten the adjustment screw counter nut (1b) back up, taking care not
to rotate the adjustment screw (1a) whilst doing so;
Torque wrench setting 100-120 Nm.
The adjustment procedure is finished and the unit is ready for a final check
Try pulling off with the tractor with the semi-trailer brake on, to
see whether you can still detect some clearance. If the
N
clearance detected is considerable, this means that the fifth
O
wheel no longer has any clearance adjustment options.
T
E
In these cases, replacement of the jaw lock mechanism is
required, as per directions in section 7.2 - REPLACEMENT OF THE
JAW LOCK MECHANISM, at page 30/36.
FIFTH WHEEL Rp10
2c
7
11b
PAG.
25/36
CHAP. 5
REV. 00
19c