Table of Contents
Advertisement
sure that all intensity levels are set to 0. Once this process is
completed, restart using your ANTELOPE.TECHWEAR according
to the instructions in this manual. (see 8.1).
NOTE
Tapping the muscle groups on the EMS tab of ANTELOPE.APP
will enable individual regulation of specific muscle groups.
8.7.1 Ending the Stimulation
Stimulation can be ended by:
•
Pressing the [-] button on the BOOSTER for 3 Seconds.
•
Pressing "pause" on the ANTELOPE.APP.
OR
DANGER
•
Directly detaching the BOOSTER from the Baseplate or Exter-
nal Cables by pulling with force.
8.8 Using the ANTELOPE.2C-BOOSTER and ANTELOPE.
8C-BOOSTER
NOTE
Please fully charge the ANTELOPE.8C-BOOSTER before initial
use.
13
8.8.1 Battery status
•
Whilst charging the BOOSTER will display a flashing green
LED.
•
Once you disconnect the BOOSTER from the charger, the
LED will switch off.
•
Once the remaining charge drops under 20%, the BOOSTER
will display a red LED.
8.8.2 Charging the BOOSTER
The BOOSTER takes approximately one hour to fully charge and
it provides approximately 6 sessions.
To avoid damage to your equipment please check the following
requirements before charging the BOOSTER:
•
Your charging plug is compatible with your country's power
socket.
•
The nominal voltage in your electrical network fits the re-
quirements of the charging device you are using.
ANTELOPE - part of the Beurer group - BEURER GmbH
Advertisement
Table of Contents
