Audi Q7 2017 Manual page 52

Button combinations for service
System reset
To restart (reset), the following buttons must be briefly
pressed at the same time:
• NAV/MAP (or CAR).
• Rotary pushbutton.
• RADIO.
Screenshot
When a screenshot is taken, only the image transmitted by
the MMI is saved. The image is saved to the internal
memory of Information Electronics Control Module 1 J794.
To save a screenshot, the following buttons must be
pressed in succession and held down:
• NAV/MAP (or CAR).
• Rotary pushbutton.
The display on the MMI monitor flashes briefly to indicate
that the screenshot has been saved. In total, up to 50
screenshots can be stored in J794. When the 51st screen-
shot is saved, the first screenshot is overwritten.
The saved screenshots can then be copied from J794 to an
SD card using the VAS Scan Tool. The procedure is as
follows:
1. Insert a blank SD card into the left SD card reader (SD1).
2. Select "5F – Basic setting" in the Guided Functions.
3. Start the "Write analysis data to SD card" Test Plan.
The analysis data including the screenshots are now copied
to the SD card.
Engineering menu
To access the Engineering menu, the following buttons
must be pressed in succession and held down:
• NAV/MAP (or CAR).
• MEDIA.
48
Button combination for system reset
Button combination for screenshot
Button combination for the Engineering menu
637_069
637_070
637_071